پراب دما (Temperature Probe)

افزودن به لیست علاقه مندی ها
افزودن به لیست علاقه مندی ها
  • تیپ : K , J , R, S, T, E, N, B
  • طول سیم : از یک متر الی 10 متر
  • سوکت ترمکوپل : فیشی و تیغه ای
  • قطر سیم: از 2x0.25 الی 2x2.5
افزودن به لیست علاقه مندی ها
افزودن به لیست علاقه مندی ها
تماس بگیرید
صفحه اصلی/Shop/ترموکوپل/پراب دما (Temperature Probe)

توضیحات

پراب دما

Temperature probe

پراب دما

پراب سنسوری همانند ترموکوپل است که برای اندازه گیری دما در محل هایی که مایل به نصب ترموکوپل نیستیم و میخواهیم دما را لحظه ای اندازه گیری کنیم  از این سنسور استفاده میکنیم.

پراب های ترموکوپل اساس سیستم ترموکوپل فلزی میباشد که در آن از دو فلز با حنس متفاوت استفاده میشود که در سر آن جوش داده میشوند که اصطلاحا به جانکشن ترموکوپل شناخته میشوند

هریک از پراب های ترموکوپل ما در انواع متفاوتی از جانکشن ها موجود است

پراب تایپ K استاندارد و متداول ترین پرابی است که برای بازه اندازه گیری وسیعی پیشنهاد میشود و مناسب برای استفاده دربازه دمای ۲۰۰- تا ۲۰۰۰- میباشد.

پراب با توجه به محل نصب و کاربری به پراب های تیپ K ، J ، R ، S و … انواع مختلفی دارد

مانند پراب های immersion ، air probes

 

  • Negative Temperature Coefficient (NTC) thermistor 

A thermistor is a thermally sensitive resistor that exhibits a large, predictable, and precise change in resistance correlated to variations in temperature. An NTC thermistor provides a very high resistance at low temperatures. As temperature increases, the resistance drops quickly. Because an NTC thermistor experiences such a large change in resistance per °C, small changes in temperature are reflected very fast and with high accuracy (0.05 to 1.5 °C). Because of its exponential nature, the output of an NTC thermistor requires linearization. The effective operating range is -50 to 250 °C for glass encapsulated thermistors or 150°C for standard

  • Resistance Temperature Detector (RTD) 

An RTD, also known as a resistance thermometer, measures temperature by correlating the resistance of the RTD element with temperature. An RTD consists of a film or, for greater accuracy, a wire wrapped around a ceramic or glass core. The most accurate RTDs are made using platinum but lower-cost RTDs can be made from nickel or copper. However, nickle and copper are not as stable or repeatable. Platinum RTDs offer a fairly linear output that is highly accurate (0.1 to 1 °C) across -200 to 600 °C. While providing the greatest accuracy, RTDs also tend to be the most expensive of temperature sensors

  • Thermocouple

This temperature sensor type consists of two wires of different metals connected at two points. The varying voltage between these two points reflects proportional changes in temperature. Thermocouples are nonlinear, requiring conversion when used for temperature control and compensation, typically accomplished using a lookup table. Accuracy is low, from 0.5 °C to 5 °C.  However, they operate across the widest temperature range, from -200 °C to 1750 °C

  • Semiconductor-based sensors

A semiconductor-based temperature sensor is placed on integrated circuits (ICs). These sensors are effectively two identical diodes with temperature-sensitive voltage vs current characteristics that can be used to monitor changes in temperature. They offer a linear response but have the lowest accuracy of the basic sensor types at 1 °C to 5 °C. They also have the slowest responsiveness (5 s to 60 s) across the narrowest temperature range (-70 °C to 150 °C).

نقد و بررسی‌ها

هنوز بررسی‌ای ثبت نشده است.

اولین کسی باشید که دیدگاهی می نویسد “پراب دما (Temperature Probe)”

نشانی ایمیل شما منتشر نخواهد شد. بخش‌های موردنیاز علامت‌گذاری شده‌اند *